AJAX MotionCam Outdoor Wireless Outdoor Motion Sensor with Built-in Camera
Lightning-fast alarms. Verified.
MotionCam Outdoor recognizes intrusion from the very first steps on the territory and confirms it with an animated series of photos. Visual verification helps to instantly ascertain the situation, saving users from concerns, and security companies from unnecessary dispatches.
Don't miss a thing
Combining the best optics, fast processor and advanced software algorithms, MotionCam Outdoor takes informative pictures in any weather, day or night.
CMS software supporting visual alarms verification
Intelligent false alarm filter
MotionCam Outdoor is equipped with two independent PIR sensors, the signals of which are analyzed by a two-step LISA algorithm. As soon as both sensors detect motion, LISA performs correlation and spectral analysis of the signals, which helps to instantly distinguish real threats from interference.
Notifications about detachment
Configurable Hub — Detector polling periods
Effective security in any weather
MotionCam Outdoor resists the heat up to +60°С and withstand the cold up to –25°С. And to protect the sensors of the anti-masking system from rain and snow, we have provided a special Hood.
Efficiency in heat and cold
IP55 body protection
Hood to protect from rain and snow in the kit
Uncompromising communication reliability
MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweller and Wings. Radio protocols work independently of each other and each is focused on its own function. Jeweller transmits alarms in 0.15 seconds, and thanks to Wings, the first shot from the site will be in the app in less than 9 seconds.
The radio signal range is sufficient to install the detector where it will be most effective. And up to 3 years of battery life minimizes maintenance efforts.
Less manual labor. More settings in the app.
The process of connecting and configuring MotionCam Outdoor saves installation engineers time in the best possible way. To add a detector to the system, all you have to do is scan the QR code with the Ajax app, assign a name and a room to it. Configure the device in the app in real time,test detection zones and communication. If necessary, the detector can be disabled or its system parameters can be reconfigured remotely, without visiting the site.
Classification: Electro-optical radio channel security detector
Type of detector : Wireless
Installation method : Outdoors / indoors
Recommended installation height: 0.8 – 1.3 m
Compatibility Only with Hub 2 or Hub 2 Plus
2 × Not compatible with ReX radio signal range extender
Sensing element : 2 × PIR sensor
Motion detection distance: Adjustable, from 3 to 15 m
Pet immunity :Animals up to 80 cm tall
Sensitivity : Adjustable, 3 levels
Motion detector’s viewing angle: Horizontal — 90°, Vertical — 80°
Camera’s angle :Horizontal — 105°, Vertical — 50°
TV distortion (EBU standard): Barrel, –17%
Photo in case of alarm Photo resolution: 320 × 176 pixels (by default)
640 × 352 pixels
Shooting series up to 5 photos
Infrared light for shooting in the dark: Available
Power supply : 4 × CR123A batteries
Supply voltage : 3 V
Battery life : Up to 3 years (up to 2.5 years if “Delay when entering” setting is activated)
Jeweller radio technology: Communication range with a hub — up to 1,700 m in an open space
Two-way communication between hub and device
Operating frequencies — 868.0–868.6 MHz3
Self-adjusting RF output power — up to 20 mW
Block encryption with a dynamic key
Detector polling period — 12–300 s
Alarm delivery time: 0.15 s
Wings radio technology : Transmission of a series of photos, Photo delivery time with a default settings: up to 9 seconds
Temperature sensor: Available
Operating temperature range: From –25°С to +60°С
Operating humidity : Up to 95%
Protection class: IP55
Anti-sabotage : Anti-masking, Protection against forgery, Jamming detection, Tamper-resistant
Remote configuration and testing: Available
CMS compatibility: CMS connectivity: Contact ID, SIA (DC-09)
Dimensions: 206 × 108 × 93 mm
Weight: 470 g